3D – RR-Labs

Drill Guide-Mortise Door Marker (All Plastic) *New

admin — Mon, 11 Dec 2023 01:59:50 +0000

This one item gets you two drill guides for the IN series MORTISE locks. They are intended for the Sargent & Corbin Russwin locks and any IN series technology (IN100, IN120, IN220). This will help the installer locate all of the required holes.

This guide can be fastened to the door with 2 #8 screws, or clamps. All temps screw holes will be covered by the product as it’s being installed.

Note: This item is built to order and can require a lead time of several days.

Reader Desk Mount

admin — Fri, 28 Apr 2023 21:39:09 +0000

This desk mount for the Accentra updaters can accept both the NTX612 & NTX642. Just flip this stand over and mount the appropriate size updater. There are two holes on the back face, for the wire that goes to the controller.

Multiple colors are available. This item does have a long print time, so it will take a couple of days before it ships.

** New Color Avail ** (Marble white & Speckled Black)

DPS Holder (for mounted samples)

admin — Wed, 10 Nov 2021 02:33:07 +0000

This DPS holder mounts to the edge of a lock sample and allows the DPS magnetic portion to sit in two postions: Over the switch portion (showing a closed door) and away from the switch portion (showing a door open). This is especially handy for checking door held open conditions.

Double stick tape not included

OSDP Enclosure for Cypress Adapter

admin — Mon, 11 Oct 2021 03:54:29 +0000

This is an enclosure only that can contain an adapter board from Cypress Integration Solutions. This adapter board can be used with an updated Weigand Tester (WT2) and a custom cable to test the SN series integrated locks, in OSDP mode.

Note: The WT2 may need an updated firmware chip. Check with the product manager.

Aperio Hub Surface Mount Box

admin — Mon, 11 Oct 2021 03:32:38 +0000

This back box is designed for any Aperio hub, and features a ceiling bracket that adjusts the angle of the hub. The wire is “mostly concealed” within the bracket and the back box. This allows a hub to be mounted in more unique locations.

03-30-2026 Added brass threaded inserts to the box to allow a better connection between the Hub and surface box. Two 4-40 x 3/8″ screws provided.

02-04-2026 Created a variation that allows a wiremold connection. This style has no ceiling mount post, but does include two holes in the bottom so the box can be fastened to the wall or ceiling. Wiremold model 700/500 compatible.

07-31-2024 Updated the design to enlarge the wire channel. Now an RJ45 connector can fit straight through.

Note: This item is built to order and can require several days to complete an order.

Drill Guide-Cylindrical Lock w/Bushings

admin — Sun, 10 Oct 2021 21:59:09 +0000

Now with BUSHINGS!!

This drill guide is intended for the Sargent 10G & 10X cylindrical locks and any IN series technology (IN100, IN120, IN220). This will help the installer locate all of the required holes, plus contains an angled channel to assist with the hole needed for the lock cable. The Steel bushings are now incorporated into this drill guide to allow them to last longer.

This guide can be fastened to the door with 3 #8 screws, or clamps. All temps screw holes will be covered by the product as it’s being installed.

Note: Any color not showing a stock quantity can be made within a couple of days.

2022-03 Instructions

(Old) Drill Guide-Cylindrical Locks (All Plastic)

admin — Sun, 10 Oct 2021 21:42:28 +0000

(OLD, This model has a newer version with Steel guides) https://rr-labs.net/product/drill-guide-w-bushings/

This drill guide is intended for the Sargent 10G CYLINDRICAL locks and any IN series technology (IN100, IN120, IN220). This will help the installer locate all of the required holes, plus contains an angled channel to assist with the hole needed for the lock cable.

This guide can be fastened to the door with 3 #8 screws, or clamps. All temps screw holes will be covered by the product as it’s being installed.

Note: This item is built to order and can require a lead time of several days.

Latch Collar

admin — Sun, 10 Oct 2021 18:13:28 +0000

These latch collars will hold a cylindrical latch within the door, so it does not fall out of the lock chassis. This was created for a job where UNIT locks were removed and cylindrical locks were installed (with a wrap plate). An issue was discovered where if the latch screws became loose, the latch could swing out of the lock chassis. This would prevent both handles from working and could allow people to get locked in (and out).

The design of this block has two dimensions: 1) 1-3/4″; 2) 1-1/2″. Installing this on a latch is easy (no tools needed) and there is a friction fit so it wont rattle around inside the door.

Battery Holder

admin — Sun, 10 Oct 2021 17:17:59 +0000

These 3D printed battery holders are great for keeping your sample ‘unpowered’ when not in use. These mount to the webbing at the bottom of the sample mount. These will work on the Yale Accentra mounts as well. Optionally these battery holders can also carry the wrench to get the cover off the sample as well.

Note: This item is built to order and can require a lead time of several days.